The little embedded shapes are made from glow in the dark polymer clay...
They were cut out using tiny polymer cookie cutters!
Just roll the clay out to about an 1/8 inch thick an cut several of each shape.
I wanted them closer in height so I shortened the ghost a bit.
Bake these in an oven at 275F for about 6-7 minutes.
Once they've cooled you can draw on faces with a permanent marker and seal with a coat of Mod Podge.
Mix up a batch of EasyCast resin and fill the mold.
*ETI recommends wearing gloves for your safety* Gloves also help keep your nails nice!
Add the little shapes...
Let set to harden for 24-72 hours.
If the bangle has a groove you can add an extra dome of EasyCast resin and let set for and addition 24-72 hours.
I love how sweet this bangle is for those that don't want a spooky Halloween accessory.
And the glowing is a plus!!
No comments:
Post a Comment
Thanks for stopping by!
Note: Only a member of this blog may post a comment.