Saturday, August 17, 2013

Pink Glowing Pin and Hair Pin Set

I found some shaped glitter that matched the pale pink of this glow in the dark puff paint and just had to whip up some accessories! They are so soft and delicate looking :)


Supplies: EasyCast Resin, Castin'Crafts Mold Release, Wilton Gum Paste Mold, Tulip Glow in the Dark Fabric Paint, and shaped glitter.


Spray the mold with some mold release and mix up a batch of EasyCast Resin.
*ETI suggests wearing gloves when working with resin for safety* Gloves also help keep your nails nice :)
Squeeze in some Glow Paint and stir gently but thoroughly.


Pour into the prepared mold...


Add some of the shaped glitter and embed to the bottom of the mold cavity using a toothpick.
Let this set to harden for 24-72 hours.


The flower buttons don't have any glitter, while the bow does.
They both glow bright and beautiful!


To turn the resin pieces into accessories I'm using some E-6000 and a pin back and hairpin blanks.


Add a dab of E-6000 to the jewelry finding...


Then press onto the back of the resin piece.
Let these sit for 24 hours to achieve the maximum adhesion!

 
Super sweet and simple :)

 
 

1 comment:

Thanks for stopping by!

Note: Only a member of this blog may post a comment.