Saturday, July 6, 2013

Glowing Jawbreaker Set

I was pondering the semi-opacity of the glow in the dark puff paint and got to thinking about jawbreakers. I did some jawbreaker fingernails a while back and thought this would be a neat way to transfer the concept to resin. As an added bonus they glow!

For supplies I used EasyCast Resin, Castin' Crafts Mold Release, the jewel mold, glow in the dark puff paint in natural color, and red, yellow, and blue glitter in hexagon and ultra fine.
*ETI suggests wearing gloves when working with resin for safety* Gloves also help keep your nails nice :)

I mixed up a batch of EasyCast resin and added a little of each type of glitter- remember jaw breakers are mainly off white with splotches of color. Then I added the glow paint to get the opaque color.

 
 
I sprayed the mold with Castin'Crafts Mold Release the I poured the resin mixture into the round jewel cavities to get the jaw breaker shape. Let this set for 24-72 hours to harden.
 

This is some resin "jawbreakers"glowing away.
I poured the left over resin mix into some tiny bottle caps which will be added to my scrap resin piece supply :)


To make these into a set of earrings I used some earrings with loops attached to the front, some small split rings, E-6000 adhesive, and jewelry pliers. You need 4 resin pieces for 2 earrings.


Apply E-6000 to the back of one resin pieces...


Press a split ring into the adhesive with half of the ring sticking over the edge of the resin to create a loop.


Take a second resin piece and sandwhich the split ring in between. Repeat this for the next earring and let dry for 24 hours to get maximun adhesion.


I attached a couple of split rings to the loop on the earring...


Then attach the resin "jaw breaker"!


For a ring, you'll need a ring blank and E-6000 adhesive.


Apply some E-6000 to the ring blank.


Press the resin piece onto the ring blank and let dry face down for 24 hours to get maximum adhesion.


I think these are too cute!!

<a href="http://www.bloglovin.com/blog/9825281/?claim=w4s9yn4gs56">Follow my blog with Bloglovin</a>

3 comments:

  1. Very cool! I would like to follow you but I am not on google+ yet! Have you thought of adding bloglovin, follow by email or Google friends connect?


    La-Vie B.
    Follow me at C’est La-Vie Designs Unlimited, LLC

    ReplyDelete
    Replies
    1. Thanks for the advice and for helping me to get them on my blog :)

      Delete
  2. Very cute indeed! Look good enough to eat. ^.^

    ReplyDelete

Thanks for stopping by!

Note: Only a member of this blog may post a comment.